Zhejiang Waxing Electromechanical Co., Ltd is one of the most professional manufacturers and suppliers of v belt a-28 factory in China. Welcome to buy high quality customized bearings made in China here from our factory. For price consultation, contact us.
V-belts are primarily classified based on three dimensions: cross-sectional dimensions, belt body structure, and cord structure; classification by cross-sectional dimensions is the most fundamental.
Classification by cross-sectional dimensions
Standard V-belts: Wedge angle of 40°, relative height of approximately 0.7. Available in seven sizes ranging from smallest to largest-Y, Z, A, B, C, D, and E-and suitable for general industrial power transmission.
Narrow V-belts: Wedge angle of 40°, relative height of 0.9; load-carrying capacity is 50% to 150% higher than that of standard V-belts.
Datum width system (Metric/ISO): Models include SPZ, SPA, SPB, and SPC.
Effective width system (Imperial/RMA): Models include 3V (9N), 5V (15N), and 8V (25N).
Wide V-belts: Primarily used for variable-speed drives in agricultural machinery; characterized by a wider cross-section.
Banded V-belts: Multiple V-belts of the same type (standard or narrow) are joined at the top by a rubber-impregnated fabric tie-band to prevent vibration and turnover; suitable for high-power applications and environments subject to shock loads.
Classification by Belt Body Structure
**Wrapped V-belts:** The outer layer is wrapped in rubberized fabric to protect the internal structure; they are easy to manufacture and the most widely used type.
**Raw-edge V-belts:** The sides are unwrapped (cut-edge); they offer good heat dissipation and flexibility, making them common in automotive engines and high-speed drive systems.
**Cogged V-belts:** The underside features a cogged (toothed) profile, providing excellent flexibility; suitable for use with small-diameter pulleys.
Classification by Belt Core Structure
**Fabric-core V-belts:** The load-bearing layer consists of multiple plies of rubberized fabric; they are simple to manufacture but offer only moderate tensile strength.
**Cord-core V-belts:** The load-bearing layer consists of single or multiple rows of cords (e.g., polyester or aramid); they offer good flexibility and fatigue resistance, making them suitable for high-speed, heavy-load applications.
Selection Note: Standard V-belts and narrow V-belts must not be mixed within the same drive system, and a single set of pulleys should use belts of the same specifications and from the same manufacturer.

Hot Tags: v belt a-28 factory, China, manufacturers, suppliers, factory, customized, price, made in China


