For a new forklift or a forklift that has stopped working for a long time, within two weeks of starting to use, for the bearings that should be lubricated, when lubricating, use new oil to squeeze out all the old oil and lubricate it more than twice. At the same time, attention should be paid to The following points:
1. Before lubricating, the dirt on the oil cap, oil plug and oil nipple should be removed to prevent the dirt from falling into the mechanism.
2. When injecting the lubricant with a grease gun, it should be injected until the parts of each component are combined to squeeze out the lubricant.
3. Seasonal lubricants (engine oil, etc.) should be replaced in summer or winter.
