We often see some mechanical equipment parts in our lives. I do n’t know if you have any simple knowledge, like the ball bearing accessories we often use. Do you know how to clean it after use? In fact, for ball bearings Cleaning and inspection is very necessary, so it will be very convenient for us in the future. Then let's take a look at the cleaning method of ball bearings. I hope everyone can have some understanding of what we have below, then Let's take a look.
1. Due to the long service life, when cleaning the ball bearings of old motors or imported motors, the ball, bead frame and inner ring should be turned out of the outer ring laterally and then immersed in hot oil. Cleaning of short cylindrical roller ball bearings At the same time, the roller, bead holder, inner ring and outer ring should be disengaged. During hot oil cleaning, the temperature of the oil should not exceed 20 ° C. When heating directly with an open flame, care should be taken to prevent the oil from burning. The ball bearings should be suspended in the oil pan. The sink bottom will cause overheating and reduce the hardness.
2. Soak the ball bearing in kerosene for 5-10 minutes. Hold the inner ring with one hand and turn the outer ring with the other hand. The dry oil or rust-proof paste on the ball bearing will fall off. Then put the ball bearing into a cleaner kerosene, brush it with a soft brush, and clean the ball, ball frame, inner ring and outer ring when cleaning the radial spherical ball bearing and short cylindrical roller ball bearing. Wash the cleaned ball bearings with a clean cloth.
