The clutch release bearing is a thrust bearing (commonly known as the clutch pinball plate). It is installed between the clutch and the transmission. The return spring causes the shoulder of the release bearing to always resist the release fork and retreat to the final position, in contact with the release lever. Keep a gap of about 3~4mm at the end (separation finger). When the clutch pedal is depressed, the clutch release bearing will push the pressure plate or drive plate to move toward the clutch housing to complete the clutch separation work.
When the clutch release bearing fails, the following measures can be taken:
1. Replace the release bearing: If the clutch release bearing is damaged, it needs to be replaced with a new release bearing. When replacing, you should choose the release bearing model and specifications that match the original vehicle and replace it according to the operating regulations.
2. Check and adjust the clutch pedal free stroke: If the clutch pedal free stroke is not adjusted properly, it will cause the release bearing to keep rotating, resulting in damage in a short period of time. Therefore, after replacing the release bearing, the clutch pedal free travel should be checked and adjusted to the specified range.
3. Avoid bad driving habits: Correct driving habits can extend the service life of the release bearing. When driving, do not frequently step on the clutch pedal to avoid the clutch being in a half-engaged and half-disengaged state for a long time. In addition, there is no need to hold the forward gear on the clutch pedal when waiting for a red light, which can slow down the wear rate of the release bearing.
4. Pay attention to daily maintenance: perform regular maintenance and inspection of the clutch, including cleaning and lubricating clutch parts. During maintenance, attention should be paid to checking whether the release bearing is loose or severely worn. If necessary, it should be replaced in time.
In short, when the clutch release bearing fails, timely measures should be taken to repair or replace it to ensure the normal driving and safety performance of the vehicle. At the same time, in daily driving, you should also pay attention to correct driving habits and regular maintenance to extend the service life of the clutch and its components.